Unknown availability
| Personal pickup at place |
|---|
A 100 Gigabit switch for enterprise networks and data centers. Hot-swappable parts and insane port density with 1.2 Tbps switching capacity!
As our 100 Gigabit product family grows, the time has come to introduce a serious enterprise-level switch. A switch that is up for the challenge when the CRS504 port density is just not enough. Introducing the spectacular CRS518-16XS-2XQ!
With 2x 100 Gigabit QSFP28 ports and 16x 25 Gigabit SFP28 ports, this is the perfect cost-effective addition to any enterprise network or data center. And with dual-redundant hot-swappable power supplies and fans, you won’t have to worry about unnecessary downtime.

Here’s a real-life setup – similar to the one we’re using in our office:
At the top, you could place two flagship CCR2216 routers to provide the main connectivity and routing. Then a blazing-fast 100 Gigabit connection leads to three CRS518 distribution level switches. This is where all the magic happens. The CRS518 switches connect every access level device to the main network, deal with traffic filtering, and network policy enforcement. And they handle all that with grace and dignity – thanks to the fantastic Marvell Prestera Aldrin2 switch-chip. The same chip you’ve seen in our flagship CCR2216 that did wonders with L3 Hardware Offloading.
The 25-gigabit ports are backward compatible with 10 Gigabit and 1 Gigabit SFP devices. Mix and match as you need!
The two hot-swap power supplies support a high input voltage range: 100-240 V. The board itself uses up to 45 W of power, while the total maximum power consumption goes up to 77 W with all the attachments. It can be a bit more power-hungry than the CRS504, but you would be too if you had 16x 25-Gigabit ports, wouldn’t you?
Our 100 Gigabit product family keeps growing: switches, routers, cables, and QSFP28 modules. If you want real speed and ultimate flexibility for the best price on the market – you want MikroTik!
Nothing can stop this switch: it supports VLAN (802.1Q, 802.1ad), L3 hardware offloaded routing, ACL, LACP, MLAG, Jumbo frames, IGMP/MLD snooping, and so on. Keep your RouterOS up to date and enjoy the real power of CRS!
SPECIFICATIONS
CPU: Qualcomm QCA9531, 650 MHz, single-core
Switch chip and memory/storage: Marvell Prestera Aldrin2 (98DX8525), 64 MB RAM, 16 MB Flash
Ports: 2x 100G QSFP28, 16x 25G SFP28, 1x RJ-45 (100 Mbps), 1x console port (RJ-45), 1x USB type A
Operating system: MikroTik RouterOS v7 (License level L5)
PoE support: no
Power: 2x AC 100-240 V (Hot-Swap)
Dimensions: 443 x 265 x 44,5 mm

Useful links and videos:
Declaration of Conformity + User Manual
Device Setup via Quick Set Guide
Resetting Device, Reset Button Functions
RouterOS Recovery using Netinstall Utility
Load Balancing Configuration (Traffic Splitting Between Multiple Internet Connections)
Failover Setup (Switching to Backup Link in Case of Failure)
Multiple uplinks using PCC & Load balancing
Static NAT & RouterOS
MikroTips: Netinstall
| Brand | |
| Type specification : | Switch |
| Manufacturer : | MIKROTIK |
| Technical specification | |
| Fanless : | no |
| Homologation EN50155 : | no |
| Switching capacity (Gbps) : | 1200 |
| Management : | yes |
| NAND (MB) : | 16 |
| Outdoor use : | no |
| Indoor use : | yes |
| Max. operating temperature (°C) : | 70 |
| Min. operating temperature (°C) : | -40 |
| Placement : | rack |
| Switch throughput (Mpps) : | 600 |
| OSI layer : | L3 static (L2+) |
| Processor | |
| Number of Cores : | 1 |
| Processor : | Qualcomm QCA9531, 650 MHz |
| Memory | |
| Memory size (MB) : | 64 |
| Chipset | |
| Chipset : | Marvell Prestera Aldrin2 (98DX8525) |
| Display | |
| Display : | no |
| Network interfaces | |
| Gigabit LAN : | no |
| LAN : | yes |
| Port Speed : | 100 Gb/s + 25 Gb/s + 100 Mb/s |
| Wi-Fi : | no |
| Inputs and outputs | |
| QSFP28 : | 2 |
| RJ-45 : | 1 |
| RJ-45 console/management : | 1 |
| Interface : | LAN, SFP28, QSFP28, USB |
| RS-232 : | no |
| SFP28 (počet) : | 16 |
| USB 2.0 : | 1 |
| Card reader | |
| MicroSD card support : | no |
| Power supply | |
| Power type : | redundant |
| Power type : | internal power supply |
| Input voltage (V) : | 110 - 240 (AC) |
| PoE support : | no |
| Power consumption - typical (W) : | 77 |
| Input Voltage (V) : | 100 - 240 (AC) |
| Operating system | |
| License : | L6 |
| Operating system : | RouterOS |
| Physical properties | |
| Color : | white |
| Dimensions : | 443 × 265 × 44,5 mm |
| Warranty | |
| Warranty period EU (months) : | 26 |
| Warranty period CRN (months) : | 26 |
Code: NETXTE66627
Code: NETXTE6628
Code: NETXTE6568
Code: NETXTE6630
Code: NETXTE6629
Code: NETXTE6627
Code: NETXTE6626
Code: NETXTE6625
Code: NETXTE66627
Code: NETXTE6628
Code: NETXTE6568
Code: NETXTE6630
Code: NETXTE6629
Code: NETXTE6627
Code: NETXTE6626
Code: NETXTE6625
Code: NETXTE66627
Code: NETXTE6628
Code: NETXTE6568
Code: NETXTE6630
Code: NETXTE6629
Code: NETXTE6627
Code: NETXTE6626
Code: NETXTE6625
Code: NETXTE66627
Code: NETXTE6628
Code: NETXTE6568
Code: NETXTE6630
Code: NETXTE6629
Code: NETXTE6627
Code: NETXTE6626
Code: NETXTE6625
Code: NAPMKR1027