Product categories

XtendLan EOC11, LAN over Coax, 100Mbps, pair (receiver and transmitter)

2 291 CZK 1 894 CZK without VAT
Common price: 2 542 CZK

It will be in stock 1.4.2026

Personal pickup at place
Code: NETXTE6440 PN: EOC11 Warranty: 26 months
Výrobce: XtendLan
 (100MEGA Distribution s.r.o.)
Železná 7, 619 00 Brno, Česká Republika
info@100mega.cz
www.100mega.cz
XtendLan EOC11 Ethernet transmission over coaxial lines, aimed at economical conversion of coaxial distribution to IP, especially suitable for video surveillance systems. Range 1 km on RG59 & 2 km on RG6 ... more
XtendLan EOC11 Ethernet transmission over coaxial lines, aimed at economical conversion of coaxial distribution to IP, especially suitable for video surveillance systems. Range 1 km on RG59 & 2 km on RG6 Cumulative transmission speed up to 200 Mbps in both directions Pair of devices, only one pair can be installed on one coaxial line Can be combined with DC voltage in coaxial cable Features: - Ethernet Interface: 10/100 Base-TX, RJ-45, Auto-Negotiation, Auto-MDI/MDI-X, IEEE 802.3u, IEEE 802.3 - Coax Interface: BNC - Cumulative transmission speed of all communicating devices on a single cable segment: 200 Mbit/s - Only one pair of devices can be used on one coaxial cable. - Transmission frequencies occupied 2-89 MHz - Devices are factory paired, individual ends of the connection cannot be interchanged, in case of a failure of one of the sides, both sides must be replaced. - Max. line attenuation 65 dB, range up to 2 km for e.g. RG6 cable. - The transmission medium is impedance independent, it is not necessary to use 75 Ohm impedance cabling, the device can be used for other impedances and the wiring does not need to be terminated. - The device carries any Ethernet traffic (i.e. Layer 2) and is independent of network protocol. - The use of a metallic medium other than coaxial cable is possible. - It does not transmit voltage to the coaxial line & does not have power from the coaxial line - The existence of a voltage in the coaxial wiring up to 50 V is not an obstacle - LED indication of coax and LAN connection established - Protected against reverse polarity - No moving parts BASIC SPECIFICATIONS Interface: 1x BNC, 1x RJ-45 Transmission speed: up to 200 Mbps in both directions Dimensions: 97 x 64 x 26 mm Power supply: DC 6-36 V from external adapter (not included), DC 12 V recommended, power consumption max. 6 W (typically 1 W), 5.5/2.1 mm jack Operating temperature: -30 to +50 °C, humidity 10-90 % (non-condensing)
Brand
Type specification :  Converter
Manufacturer :  XtendLan
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili
Scroll